iMac Setup Assistant

Note:This procedure can also be downloaded in MSWord format, pdf format or as a plain text file (txt).
If you wish to download this procedure, right-click on the appropriate link below and choose Save Target As....
Note the file name and where it's being saved to. Click the Save button. The pdf file requires Adobe
Acrobat Reader which is free. Click HERE for a link to Adobe Acrobat Reader.

WSWord (.doc)
PDF (.pdf)
Text file (.txt)

1. Locate the Assistants folder on your hard drive and open it..
2. Double-click the Internet Setup Assistant icon.

3. An Internet Setup Assistant window will shown.
Click Yes to continue.

4. Click Yes.

5. Click on the right arrow to continue.

6. Type Valkyrie for the name of the configuration.
7. Verify that Modem is chosen.
8. Click the right arrow to continue.

9. Verify that the modem type and port are correct.
Note: The Internet Setup Assistant should already show your current
default modem, and which port it’s connected to.
10. Chose your phone line type. Most customers use tone.
11. Click the right arrow to continue.

12. Type in the Valkyrie phone number which is local for you.
Wooster: 330-263-9381
Millersburg: 330-674-7184
Sterling: 330-939-0003

13. Type in your login name and password in the areas shown.
Note: Remember that your login name and password are case sensitive.
14. Click the right arrow to continue.

15. Choose No.
16. Click the right arrow to continue.

17. Choose No.
18. Click the right arrow to continue.

19. Enter the following DNS address in the DNS box: 216.28.214.200
20. Enter the Domain Name valkyrie.net in the Domain Name box.
21. Click the right arrow to continue.

22. Type in your email address and password in the appropriate boxes as shown.
23. Click the right arrow to continue.

24. Type in your email address as shown.
25. The e-mail host for your Valkyrie configuration is mail.valkyrie.net.
Type it in as shown.
26. Click the right arrow to continue.

27. Enter news.valkyrie.net for the Network News as shown.
28. Click the right arrow to continue.

29. Choose No.
30. Click the right arrow to continue.

31. Click Go Ahead to complete the configuration and to
connect to the Internet.

YOU’RE FINISHED!